Precautions for installation and use of hydraulic nuts
Hydraulic nut has been widely used in many industries such as metallurgy, papermaking, machinery, etc. It is an advanced bolt assembly method, which has great advantages in mechanical fastening. The hydraulic nut can be used singly or in combination. It can be used manually or with an electric hydraulic pump. This can greatly improve the use efficiency of the hydraulic nut , but the premise is that the hydraulic nut must be properly installed and operated. The following are the matters that must be paid attention to when installing and using the hydraulic nut.
Hydraulic nut installation matters
1. The nut installation must be performed according to the instructions. If any steps are wrong, it will affect the installation effect.
2. Make sure the installation is in place. Any improper handling of details will affect the normal use of the nut.
3. After installation, check it again to ensure that the nut is installed tightly. It is best to try it on site, so that you know if there are still problems with the nut installation, and if there are problems, you must reinstall.
Matters for using hydraulic nut
1. Before using the nut, be sure to prepare hydraulic oil and connect the hydraulic nut to the workpiece so that it can work normally.
2. Pay special attention to the transportation of hydraulic oil. If the hydraulic oil transportation does not reach the standard line, do not stop. Continue to lock the key parts by hand. Wait until the hydraulic oil transportation reaches the standard and then stop. Prepare for operation.
3. Check the condition of the equipment after the hydraulic oil is delivered. Pay particular attention to the pressure of the hydraulic nut. If the pressure is normal, the next installation and disassembly can be performed.
4. The nut is often used in combination with the workpiece. Pay attention to ensure that the nut is well connected with the workpiece. If the connection is not good, there may be problems such as waste of hydraulic oil and even safety accidents. This is not worth the money.
5. After the hydraulic nut is used, it should be cleaned in time, so as to prevent the nut parts from being blocked.
In short, the installation and use of hydraulic nuts are skillful. Only a good grasp of the skills can ensure that the nut is installed in place, and it can also allow the nut to function effectively. If there is a failure during use, please find professional maintenance personnel to deal with it.
Jubang Machinery (http://lsi-fr.com) original articles, cooperative media are welcome to reprint, please indicate the source when reprinting!
- What are the characteristics of hydraulic torque wrench2019-11-07
- Installation and use precautions for hydraulic nuts2019-11-06
- The basic structure and common faults of hydraulic torque wrench2019-11-05
- The basic characteristics of hydraulic torque wrench2019-11-04
- What are the matters needing attention in the selection of specifications for hydraulic nuts2019-11-03
- What are the classifications of hydraulic wrenches
Contact: Manager Kong
Mobile: 15751150696 (WeChat)
Address: 16 Taibai Road, Fenghuang Street, Taizhou, Jiangsu Province